Chapter 6: Machinery Installations (Part IA)

Requirements for ensuring that machinery installations on ships are capable of functioning at low temperatures.

At a Glance

Chapter Summary

Chapter 6 identifies requirements for ensuring that the machinery installations used on board ships operating in Polar Regions are capable of functioning at low temperatures and in anticipated environmental conditions. These are set out in the text of Chapter 6 below and in the Part 1B Additional Guidance.

5 threats

Machinery must keep working despite ice accretion, ice ingestion, freezing liquids, cold seawater intake and snow ingestion.

6.2.1.1

Warm air in

Combustion air for engines driving essential machinery must be kept within the engine manufacturer’s temperature criteria.

6.3.2

Approved propellers

Propeller blades, propulsion line and steering equipment of Category A and B ships must be approved for ice.

6.3.3

GUIDANCE FROM FORUM PARTICIPANTS: Chapter 6

Organizations taking part in the Arctic Shipping Best Practice Information Forum have shared guidance, tools and publications relevant to this chapter. PAME does not endorse commercial services listed here.
American Bureau of Shipping (ABS)
American Bureau of Shipping (ABS) Classification Society

US-based classification society providing ship rules, surveys and certification, including for ice-class vessels.

Bureau Veritas
Bureau Veritas Classification Society

France-based classification society providing ship rules, surveys and certification.

Cefor (The Nordic Association of Marine Insurers)
Cefor (The Nordic Association of Marine Insurers) Industry

Nordic association of marine insurers that shares casualty statistics and expertise on hull and cargo risks.

DNV
DNV Classification Society

Norway-based classification society providing ship rules, surveys, certification and advisory services, including for Arctic operations.

Eimskip
Eimskip Industry

Icelandic shipping and logistics company operating in the North Atlantic.

ESL Shipping
ESL Shipping Industry

Finnish dry bulk shipping company specialising in ice-class vessels for northern waters.

Icelandic Transport Authority
Icelandic Transport Authority Governmental

Icelandic government agency responsible for the safety and oversight of transport, including shipping.

International Association of Classification Societies
International Association of Classification Societies Classification Society

Association of leading classification societies that develops common technical rules and standards for ships, including Polar Class rules.

Lloyd's Register (LR)
Lloyd's Register (LR) Classification Society

UK-based classification society providing ship rules, surveys, certification and advisory services.

Oil Companies International Marine Forum (OCIMF)
Oil Companies International Marine Forum (OCIMF) Industry

Oil industry association that promotes safe and environmentally responsible tanker and terminal operations.

Railotech (formerly Aker Arctic)
Railotech (formerly Aker Arctic) Industry

Finnish engineering company, known as Aker Arctic until 2026, providing ice model testing and ship design for icebreakers and Arctic vessels.

Russian Maritime Register of Shipping
Russian Maritime Register of Shipping Classification Society

Russia-based classification society providing ship rules, surveys and certification, including for ice-class vessels.

Sovcomflot
Sovcomflot Industry

Russian shipping company operating tankers and gas carriers, including ice-class vessels on Arctic routes.

Traficom (Finnish Transport and Communications Agency)
Traficom (Finnish Transport and Communications Agency) Governmental

Finnish government agency responsible for transport and communications safety and regulation, including maritime safety.

Have guidance relevant to Chapter 6?

Forum participants can submit guidance for review. The PAME Secretariat will contact you by email.

POLAR CODE TEXT

As adopted by IMO. Source: Full Polar Code text (IMO, PDF).

The goal of this chapter is to ensure that, machinery installations are capable of delivering the required functionality necessary for safe operation of ships.

  • 6.2.1 In order to achieve the goal set out in paragraph 6.1 above, the following functional requirements are embodied in the regulations of this chapter.
  • 6.2.1.1 Machinery installations shall provide functionality under the anticipated environmental conditions, taking into account:
  • 6.2.1.1.1 ... ice accretion and/or snow accumulation;
  • 6.2.1.1.2 ... ice ingestion from seawater;
  • 6.2.1.1.3 ... freezing and increased viscosity of liquids;
  • 6.2.1.1.4 ... seawater intake temperature; and
  • 6.2.1.1.5 ... snow ingestion.
  • 6.2.1.2 In addition, for ships intended to operate in low air temperatures:
  • 6.2.1.2.1 ... machinery installations shall provide functionality under the anticipated environmental conditions, also taking into account:
  • 6.2.1.2.1.1 ... ... cold and dense inlet air; and
  • 6.2.1.2.1.2 ... ... loss of performance of battery or other stored energy device; and
  • 6.2.1.2.2 ... materials used shall be suitable for operation at the ships polar service temperature.
  • 6.2.1.3 In addition, for ships ice strengthened in accordance with chapter 3, machinery installations shall provide functionality under the anticipated environmental conditions, taking into account loads imposed directly by ice interaction.

  • 6.3.1 In order to comply with the functional requirement of paragraph 6.2.1.1 above, taking into account the anticipated environmental conditions, the following apply:
  • 6.3.1.1 ... machinery installations and associated equipment shall be protected against the effect of ice accretion and/or snow accumulation, ice ingestion from sea water, freezing and increased viscosity of liquids, seawater intake temperature and snow ingestion;
  • 6.3.1.2 ... working liquids shall be maintained in a viscosity range that ensures operation of the machinery; and
  • 6.3.1.3 ... seawater supplies for machinery systems shall be designed to prevent ingestion of ice, or otherwise arranged to ensure functionality.
  • 6.3.2 In addition, for ships intended to operate in low air temperatures, the following apply:
  • 6.3.2.1 ... in order to comply with the functional requirement of paragraph 6.2.1.2 above, exposed machinery and electrical installation and appliances shall function at the polar service temperature;
  • 6.3.2.2 ... in order to comply with the functional requirement of paragraph 6.2.1.2.1 above, means shall be provided to ensure that combustion air for internal combustion engines driving essential machinery is maintained at a temperature in compliance with the criteria provided by the engine manufacturer; and
  • 6.3.2.3 ... in order to comply with the functional requirements of paragraph 6.2.1.2.2 above, materials of exposed machinery and foundations shall be approved by the Administration, or a recognized organization accepted by it, taking into account standards acceptable to the Organization, 11 or other standards offering an equivalent level of safety based on the polar service temperature.
  • 6.3.3 In addition, for ships ice strengthened in accordance with chapter 3, in order to comply with the functional requirements of paragraph 6.2.1.3 above, the following apply:
  • 6.3.3.1 ... scantlings of propeller blades, propulsion line, steering equipment and other appendages of category A ships shall be approved by the Administration, or a recognized organization accepted by it, taking into account standards acceptable to the Organization10or other standards offering an equivalent level of safety;
  • 6.3.3.2 ... scantlings of propeller blades, propulsion line, steering equipment and other appendages of category B ships shall be approved by the Administration, or a recognized organization accepted by it, taking into account standards acceptable to the Organization11 or other standards offering an equivalent level of safety; and
  • 6.3.3.3 ... scantlings of propeller blades, propulsion line, steering equipment and other appendages of ice-strengthened category C ships shall be approved by the Administration, or a recognized organization accepted by it, taking into account acceptable standards adequate with the ice types and concentration encountered in the area of operation.