Additional Guidance Regarding the Provisions of the Introduction and Part II-A (Part IIB)
Advises operators on the selection of stern tube lubricants and makes structural and engineering suggestions.
At a Glance
Chapter Summary
Biodegradable
Non-toxic biodegradable lubricants or water-based systems are recommended for seals in contact with seawater.
II-B 1.2
760 mm
New Category A and B ships are encouraged to carry certain noxious liquids in tanks at least 760 mm from the outer shell.
II-B 2
Invasive species
Ships should take measures against faster wear of anti-fouling coatings in ice, to reduce the spread of invasive species.
II-B 4.3
GUIDANCE FROM FORUM PARTICIPANTS: 2-B Additional Guidance
Organizations taking part in the Arctic Shipping Best Practice Information Forum have shared guidance, tools and publications relevant to this chapter. PAME does not endorse commercial services listed here.
US-based classification society providing ship rules, surveys and certification, including for ice-class vessels.
-
WEB
2023

Alaska state office of the National Audubon Society, combining science and policy to protect habitat for birds and wildlife, including Arctic marine areas.
-
WEB
2025

Global federation of environmental organisations campaigning on environmental and social issues.
-
PDF
2019
-
PDF
2019
-
WEB
2026

Association of Antarctic tour operators that promotes safe and environmentally responsible travel to Antarctica.
-
WEB
2025

United Nations agency responsible for the safety, security and environmental performance of international shipping, and for the Polar Code.
-
WEB
2023
-
WEB
-
PDF
2024
-
PDF
2023

Organisation representing Inuit in Alaska, Canada, Greenland and Chukotka, and a Permanent Participant of the Arctic Council.
-
PDF
2023
-
PDF
2023
-
PDF
2023

Norwegian government directorate under the Ministry of Climate and Environment that carries out Arctic and Antarctic research and mapping and advises Norwegian authorities on polar environmental issues.
-
WEB
2026

Canadian charity working on marine conservation in partnership with Indigenous and coastal communities, including in Arctic waters.
-
WEB
2021

Oil industry association that promotes safe and environmentally responsible tanker and terminal operations.
-
PDF
2017
-
WEB
2014
-
WEB

Focal point of the Arctic Council’s activities related to the protection and sustainable use of the Arctic marine environment.
-
PDF

Global conservation organisation whose Arctic programme works on wildlife, marine protection and shipping impacts.
-
WEB
-
WEB
2024
Forum participants can submit guidance for review. The PAME Secretariat will contact you by email.
POLAR CODE TEXT
As adopted by IMO. Source: Full Polar Code text (IMO, PDF).
- 1.1 Ships are encouraged to apply regulation 43 of MARPOL Annex I when operating in Arctic waters.
- 1.2 Non-toxic biodegradable lubricants or water-based systems should be considered in lubricated components located outside the underwater hull with direct seawater interfaces, like shaft seals and slewing seals.
Category A and B ships, constructed on or after 1 January 2017 and certified to carry noxious liquid substances (NLS), are encouraged to carry NLS identified in chapter 17, column e, as ship type 3 or identified as NLS in chapter 18 of the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk, in tanks separated from the outer shell by a distance of not less than 760 mm.
In order to minimize the risks associated with animal cargo mortalities, consideration should be given to how animal carcasses will be managed, treated, and stored on board when ships carrying such cargo are operating in polar waters. Reference is made in particular to the 2012 Guidelines for the implementation of MARPOL Annex V (resolution MEPC.219(63), as amended by resolution MEPC.239(65)) and the 2012 Guidelines for the development of garbage management plans (resolution MEPC.220(63)).
- 4.1 Until the International Convention for the Control and Management of Ships' Ballast Water and Sediments enters into force, the ballast water management provisions of the ballast water exchange standard, set out in regulation D-1, or the ballast water performance standard, set out in regulation D-2 of the Convention should be considered as appropriate. The provisions of the Guidelines for ballast water exchange in the Antarctic treaty area (resolution MEPC.163(56)) should be taken into consideration along with other relevant guidelines developed by the Organization.
- 4.2 In selecting the ballast water management system, attention should be paid to limiting conditions specified in the appendix of the Type Approval Certificate and the temperature under which the system has been tested, in order to ensure its suitability and effectiveness in polar waters.
- 4.3 In order to minimize the risk of invasive aquatic species transfers via biofouling, measures should be considered to minimize the risk of more rapid degradation of anti-fouling coatings associated with polar ice operations. Reference is made in particular to the 2011 Guidelines for the control and management of ships' biofouling to minimize the transfer of invasive aquatic species (resolution MEPC.207(62)).
Table: Example of matters related to anti-fouling systems taken into consideration by some ice-going ships (this table is used by some operators of ice-going ships)
| Hull | Sea chest | |
| Year round operation in ice-covered polar waters |
|
|
| Intermittent operation in ice-covered polar waters |
|
Compliant with the AFS Convention. Thickness of anti-fouling system to be decided by shipowner. |
| Category B and C vessels | Compliant with the AFS Convention. Thickness of antifouling system to be decided by shipowner. | Compliant with the AFS Convention. Thickness of anti-fouling system to be decided by shipowner. |
Arctic Council Working Group